Car Care

Coolant

  • The concentration of the coolant with water must not be reduced in summer or warm countries.
  • The coolant additive proportion must be at least 40%.
  • Only the Volkswagen coolant additive, G 12 A8D, may be used (available from Volkswagen Dealers).

Checking coolant level

  • The expansion tank is in the engine compartment on the bulkhead.
  • The level can only be checked properly when the engine is not running.
  • The level must be between the "MIN" and "MAX" marks on the expansion tank when engine is cold and can be slightly above the "MAX" mark when it is warm.
  • On vehicles with an automatic coolant level checking device, the warning lamp flashes continuously if the level is too low.
  • Coolant loss normally indicates leaks in the system, therefore it should be checked by a Dealer.
  • In a sealed system losses only occur if the boiling point of the coolant is exceeded as a result of overheating.

Topping up the coolant

  • Switch the engine off and let it cool down.
  • Cover the expansion cap with a cloth and turn it carefully to the left and remove.
  • Do not remove expansion cap when engine is hot. If a lot of coolant has been lost, only add cold coolant after the engine has cooled down.
  • Do not fill above the "MAX" mark.
  • Screw the cap on again, tightly.
Volkswagen logo